turbofan E22M3, Инструкция по установке и эксплуатации

Страница: 11 / 17

Cleaning and Maintenance
9
d. Whilst still holding the oven door in the open
position, clean the inner glass and the inside of the
outer glass with a conventional glass cleaner.
e. Dry the oven glass thoroughly with a soft dry cloth.
f. On completion of door glass cleaning, lower the
inner glass back into the door, the glass will locate
itself in the correct position.
g. Close the oven door.
Door Inner Glass Removal
It is possible to remove the inner glass completely from
the oven door for heavy cleaning. This can be done as
follows:-
a. Open the oven door fully.
b. Using a suitable instrument, move the door lock
catches from the unlocked to the locked position to
prevent the door from closing.
c. Raise the door until it is restrained by the door lock
catches.
d. Grasp inner glass firmly on either side and pull
upwards to remove inner glass from locating pegs
on either side of door.
Door Inner Glass Re-Fitting
a. To refit inner glass, locate 2 locating tabs on either
side of inner glass into 2 pegs on door and push
down on inner glass until it locks firmly into position.
b. Lower inner glass back into door, glass will locate
itself in correct position.
c. Open oven door fully and u sing a suitable
instrument, move door lock catches to unlocked
position.
NOTE: Check that both Door Lock Catches are in the
‘Un-Locked’ position before closing the door.
d. Close the oven door.
Periodic Maintenance
NOTE: All maintenance operations should only be
carried out by a qualified service person.
Controls and mechanical parts should be checked and
adjusted periodically by a qualified service person. It is
recommended that appliance is serviced every 6 months.
Inner Glass
Door Lock Catch in
Unlocked Position
Door Lock Catch in
Locked Position
Locating Tab
Locating Peg
Door Lock Catch in
Unlocked Position