Use Care in Moving Product and Cart Combinations
Quick stops, excessive, force and uneven surfaces may cause the product and cart combination to
overturn.
Ground the Cable System
Be sure that the outside cable system is grounded, so as to provide some protection against voltage
surges and built-up static charges.
Section 810 of the National Electric Code, ANSI/NFPA No. 70-1984(Section 54 of the Canadian
Electrical Code, Part I) provides information with respect to proper grounding of the cable modem.
Do not disconnect RF cable from your TurboComm Cable Modem while the power to your modem
is on
Use
Unplug Power Before Cleaning
Do not use liquid cleaner or aerosol cleaner. Use a damp cloth for cleaning.
Keep Objects Out of Openings
Never push objects of any kind into this product through openings, as they may touch dangerous
voltage or “short-out” parts, which could result in a fire or electric shock. Never spill liquid on the
product.
Protect From Lightning
For added protection for this product during a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall outlet, and disconnect the cable system.
This will prevent damage to the product due to lightning and power line surges. Take at least 10
seconds between DC plug off and on.
Service
Do Not Remove Covers
Do not attempt to service this product yourself, as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
Unplug this product from the wall outlet carefully, as the AC adaptor may be hot. Refer servicing to
Qualified Service Personnel Under the Conditions Listed Below
When the power supply cord or plug is damaged.
