TTF-M3
2.
Aim the top of pillar to the setting hole of oscillation base, then fixes the fan body and the pillar
by tightening four M4
×
8 cross-head screws with a screwdriver.
3.
Pass the power cord through the central gate of the base, then clamp rear base and front
base together by self cramp post on the base, coordinate the bottom of the pillar to the
position of base and tighten the four M5
×
28 cross-head screws by hand.
4.
Pass the power cord through the cord anchorage position at the bottom of the base , then put
the cord clamp on the power cord at cord anchorage position. Fix the cord clamp onto the
cord anchorage with two M4x15 cross head screws by screw driver.
☆
HOW TO USE
1. Turn the unit on at the main supply. Turn the timer setting to “ I “
2. Press speed button “ I “, “II” or “III” to adjust wind speed , or press “ 0 “ to switch off the unit.
3. Turn the timer dial to set the length of time that you want the fan to operate for. It will turn off at
the selected time. If you do not wish to use the timer, set it to “I”.