TBS-201 Wireless Vehicle detector
1
Normal conditions mean the device can work normally in most time. The wireless
communication is stable.
2. During the calibration, make sure there is no vehicle and other metal material within 1
meter around the device. or calibration will make error.
3. When the server sends calibration command to device, make sure there is no vehicle
in the parking space or calibration will make error.
4. When the device work abnormally, the device can be reset through calibration
command. If this method doesn’t work, please try to do manual calibration. (refers to
chapter 9.2)
5. For manual calibration, if device cannot connect by Bluetooth, please try to change a
magnetic stripe.
6. Re-calibration is needed once the device is moved during detecting.
7. Make sure the triangle mark on the device surface point to the direction of vehicle
leaving or entering.
8. When command to modify parameter is sent to device from server, while the device is
in dormant state and cannot receive the command until waiting for the detector sending
state. Detailed information please refer to < TBS-201 application protocol>.
9. iPhone is recommended to be used. The device can be connected and operated
through applet via Bluetooth. Because there are many android phones, some of phones
may have compatibility problem.
