A P P L I C AT I O N N O T E
E C ON E T EC +/E C ++ E th e rn e t & W iF i C on figu ra t ion
A P N t 0 2 4 E CW E C
E N R e v .1 .0 3
T U R B O s . r .l .
D u s t F i l t e r C o m p o n e n t s
V i a C e n t r o I n d u s t r i a l e E u r o p e o , 3 3
–
T u r a t e ( C O ) I t a l y
T e l + + 3 9 0 3 6 2 5 7 4 0 2 4 F a x + + 3 9 0 3 6 2 5 7 4 0 9 2
8
Method 2: Using Web Manager
Through a web interface, configure the XPort and its settings using the XPort module’s Web Manager.
1.
Run DeviceInstaller software tool and search for the list of available Lantronix device servers;
2.
Click on the Xport folder and select the Xport unit by clicking its hardware address;
3.
In the right pane, click the Web configuration tab and click on the green arrow to load web page;
4.
A dialog box appears to prompt for a User name and Password. Press OK to proceed;
5.
After few seconds, the Web page displays.
6.
Select Network from the main menu on the left side, then enter the IP address and click OK button;
7.
Press Apply Settings from the main menu on the left side and wait the end of save procedure.
