Model FC 110 EG
Steam production: As soon as the oven reaches
a temperature of 90°C, the injection of water
becomes possible. A presure on the knob gives
an injection of water of 10 seconds.
Speed : Taken out button, maximum speed
Pushed button, half-speed
Cooking selector:
Position O: Off
Position l: Convection
The rear heating elements and the and ensure
uniform heating.
Position 2: Turbo Quartz®
The quartz tubes are regulated by the thermostat
and the fan spreads the heat out evenly.
Position 3: Defrosting
The fan operates alone and by mixing the air
makes it possible to obtain fast defrosting.
Timer: 120 minutes with a setting for non-stop
use.
Green pilot light: Oven on.
Red pilot light: Convection on.
Orange pilot light: Turbo Quartz® on
Thermostat: 0 to 300°C
D
et
ai
ls
o
f f
un
ct
io
ns
0
1
2
3
6
11
Procedure for assembling and disassembling the
griddle holders
For the disassembling, lightly raise the holders in order to free the
stud of the buttonhole and pull towards you. There is a stud on the
front and the rear, be careful to not raise the holders on the bias.
For assembling, line up the hole of the buttonhole and let slide to-
wards the bottom.
How to connect the equipotential link.
Your oven is fitted with air humidifier. It is connected to the main
water supply and had to be connected to the equipotential link of
your own supply. The screw for this purpose is placed on the rear of
the oven, next to the cord.
11
