Turbo Energy SUNBOX 5.0 Series, Инструкция по эксплуатации

Страница: 13 / 34

5.2 Gen-Port
The SunBox has an intelligent input / output that can provide the equipment with
different functionalities.
Generator input
The output of a generator can be connected to this input, so that the off-grid
installation can rely on this source for power supply. The maximum power value
is 5000 W.
Microinverter or inverter input
The output of microinverters or inverters can be connected to this input, with a
total power of up to 5000W. This is a great advantage, since the number of
photovoltaic panels in the installation can be increased.
For example, if 3 microinverters of 1600 W are installed in series, we will have a
total of 4800 W (<5000W). If we connect 4 400W photovoltaic panels per
microinverter, we will have a total of 12 extra panels in our installation.
Smart Load
This mode uses this input as an output and receives power only when the battery
SOC and PV power are above a user-programmable threshold.
For example, if you have an auxiliary electric water heater connected to this
output, with this functionality you can program that, if the SOC of the battery is
above 95% and the solar production is more than 500W, the water heater will
heat up with that surplus energy.
To connect inputs or outputs to this port, remove the screws and open the front
cover of the inverter.