Turbo Air TSD-27CF, Руководство по обслуживанию

Страница: 24 / 26

CHEST FROZEN SHOWCASE
TSD-47CF/TSD-60CF
CHARACTERISTIC
Parts Name Picture Check Method and Criterion
Measure the resistance with a tester.
(Ambient temperature : Room temperature 25
°
c)
Model Main Wiring
Auxiliary
Wiring
Normal
2.5 ～ 2.9 Ω
(Approx.)S
4.1 ～ 4.7 Ω
(Approx.)S
Compressor
Model :TSD-
47CF/TSD-
60CF
DONPER
EU1121BZ
160
WATTS
Abnormal
Open(
∞ Ω
) or Short Circuited ( 0
Ω
)
Measure the resistance with a tester.
(Ambient temperature : Room temperature 25
°
c)
Model QP2-4.7C
Normal (3.8
Ω～
5.6
Ω
, Max current 18A/180V)
PTC Starter
Model : TSD-
47CF/TSD-
60CF
Abnormal Open(
∞ Ω
) or Short Circuited ( 0
Ω
)
Measure the resistance with a tester.
(Ambient temperature : Room temperature 25
°
c)
Model B85-105
Normal
Less than 1
Ω
(Approx.)
Cut temperature:115-125
℃
;Close temperature:70-52
℃
;
Overload
current
：
27A;UTC(Min action current):3.36A/70
℃
Overload
Protector
Model : TSD-
47CF/TSD-
60CF
Abnormal Open(
∞ Ω
)
Measure the resistance with a tester.
(Ambient temperature : Room temperature 25
°
c)
Model
CBB60(15µF ±5%C,250V.AC 50/60Hz)
Normal
compressor
capacity
Abnormal
Open(
∞ Ω
)
TROUBLE SHOOTING
Thermostat
Repair Procedure
1. Set Thermo Knob to OFF position, pull & straightened feeler
bulb
2. Remove Thermostat cover and pull out Thermostat from
Thermo Box
3. Short the thermostat terminal and check, if compressor runs.
4. Replace thermostat
5. After replacing Thermostat, reverse steps above.
PTC Starter
Repair Procedure
1. Release Relay Cover Fixing Clip.
2. Remove Relay Cover.
3. Remove PTC Starter
4. Pull out PTC Starter, check if open and compare value of
resistance with given value, if not
5. Hold receptacle terminal then pull electrical wire from PTC
Starter.
6. Replaces PTC Starter (change overload protector together),
reverse the steps above.