6
TROUBLESHOOTING
S
N
O
I
T
U
L
O
S
S
E
S
U
A
C
S
M
O
T
P
M
Y
S
Product freezing
Not working
- compressor and
light not on
Refrigerator not
cooling well
Noisy
Moisture on exterior of
cabinet
Moisture on interior of
cabinet
Door does not close
correctly
• Turn temperature control to
normal.
• Rearrange product, due to close
to fan.
• Turn temperature control to
normal.
• Check power by plugging power
cord into another outlet that has
power.
• Remove from heat source.
• Remove hot food and allow to
cool.
• Check position of temperature
control.
• Clean condenser.
• Check the refrigerator door.
• Check the installation and insert
the tray correctly.
• Wipe with dry cloth.
• Wipe with dry cloth.
• Keep door closed as ofen as
possible. Wipe with dry cloth.
• Adjust feet under cooler.
• Level unit.
• Reinsert gasket.
The following points are not malfunctions:
• Water-flowing sound can be heard when the compressor stops.
This is a sound of REFRIGERANT flowing.
• When compressor stops by temperature control, it is not out of order.
• This is necessary so ice will not build up on evaporator.
• The door is warm to touch, due to heater that is installed.
• Only a small amount of product
stored in unit.
• Product on top shelf only freezing.
• Temperature of refrigerator below
35˚F.
• Power or electrical failure.
• When the refrigerator is in sunlight
or near a unit that disperses heat.
• When the refrigerator contatins hot
food or too much food.
• When the temperature control is
not set correctly.
• When condenser coil is dirty.
• When refrigerator door is opened
frequently or left open.
• When the installation floor is weak
or the adjustable feet is set
incorrectly.
• When the back-side of the refriger-
ator is close to the wall.
• When the tray is not on the correct
position.
• High-moisture air can produce
dewdrops during the rainy season.
• When food with steam is stored.
• When door is opened frequently.
• When door has slant.
• When floor is not level.
• When door gasket comes out of
place.
