Turbo Air TBC-24Sx-GF-N series Скачать руководство пользователя страница 21

21

Turbo air

CAUTION : Do not use any steel wool, abrasive or chlorine based products 
to clean stainless steel surfaces.

Stainless Steel Opponents
There are three basic things which can break down your stainless steel’s passivity 

layer and allow corrosion to rear its ugly head.

1) Scratches from wire brushes, scrapers, and steel pads are just a few examples of 

items that can be abrasive to the stainless steel surface. 

2) Deposits left on your stainless steel can leave spots. You may have hard or soft 

water depending on what part of the country you live in. Hard water can leave 

spots. Hard water that is heated can leave deposits if left to sit too long. These 

deposits can cause the passive layer to break down and rust your stainless steel. 

All deposits left from food prep or service should be removed as soon as possible.

3) Chlorides are present in table salt, food, and water. Household and industrial 

cleaners are the worst type of chlorides to use.

8 steps that can help prevent rust on stainless steel:

1. Using the correct cleaning tools

  Use non-abrasive tools when cleaning your stainless steel products. The stainless 

steel’s passive layer will not be harmed by soft cloths and plastic scouring pads. 

Step 2 tells you how to find the polishing marks.

2. Cleaning along the polish lines

  Polishing lines or “grain” are visible on some stainless steels. Always scrub parallel 

to visible lines on some stainless steels. Use a plastic scouring pad or soft cloth 

when you cannot see the grain.

3. Use alkaline, alkaline chlorinated or non-chloride containing cleaners

  While many traditional cleaners are loaded with chlorides, the industry is providing 

an ever increasing choice of non-chloride cleaners. If you are not sure of your 

cleaners chloride content contact your cleaner supplier and request a non-chloride 

cleaner that can be used as alternative to chloride containing cleaners. Avoid 

cleaners containing quaternary salts as they can attack stainless steel, causing 

pitting and rusting.

STAINLESS STEEL EQUIPMENT CARE AND CLEANING

TBC Series(영)_미주향.indd   21

2017-02-13   오전 10:27:51

Содержание TBC-24Sx-GF-N series





























Отзывы: