9
MAINTENANCE AND REPAIR
Do not rinse the machine with water.
The cutter should be stored in a dry place when it is not in use.
Before every use of this cutter, check whether the blade is in good order and it
must be repaired in time if damage has been found.
The blade should be cleaned and lubricated in time after every use of the cutter.
When the cutter is to be used for a long time the blades should be lubricated
during operations interval.
TROUBLESHOOTING
Problem
Cause
Solution
Battery cannot
be charged
1. The charging cable
is not plugged in
properly
2. The ambient
temperature is too high
or too low.
3. A hot battery placed
in the charger will not
charge
4. There isn't current
at receptacle
5. The receptacle can
not connect to the
device.
6. Other Issues
1. Re-plug in the charging cable and
check the lamp on the adapter is
turning on Red.(Uncharged or Full
charged is Green)
2. Move charger and battery pack to a
surrounding air temperature of 40°F
(4°C) to 104°F (40°C)
3. Allow the battery to cool down
before charging after using the tool.
4. Check current at receptacle by
plugging in a lamp or other appliance.
5. Check to see if receptacle is
connected to a light switch which turns
power off when you turn out the lights.
6. If the receptacle and temperature
are OK, and you do not get proper
charging contact TUPANAT service
center (
).
Tool does not
work.
1. Battery is depleted.
2. The ambient
temperature is too high
or too low
3. Other Issues
1. Charge the Lithium-Ion battery.
2. Move the appliance to a
temperature-appropriate environment
for charging.
3. Please contact TUPANAT service
center (
).
Other Problems
not listed
-
Please contact TUPANAT service
center (
).
Ningbo Yinzhou Jialan Maoyi Youxiangongsi
：
ADD: Room 902, No. 5, Building 3, Yinxianghuaduliyuan, Jishigang Town, Haishu
District, Ningbo City, Zhejiang, China
Made in China
