Tuohy ANDAVI, Руководство по установке, Страница: 5 / 13

3
TYPICAL CONNECTIONS
LIGHTING WIRING DETAIL
Insert wires through post to conceal them.
Add wire extentions as needed.
Z-CLIP
Screw Z-Clips to tower using
#8 X 3/4" Flat Head Screws
DETAIL J
DETAIL H
(underside view)
PEDESTAL BRACKET
Attach to extrusion using 1/4-20 Drop-In T-Nut
and 1/4-20 x 1/2" Button Socket Cap Screw.
Screw to side
of pedestal
using #9 x 5/8"
Pan Head
Screws.
CROSS STRAPS
Attach to cabinet support using #8-32 x 1/2"
Button Head Screw.
Attach so cross strap
is fully extended.
CABINETS
Screw cabinets to cabinet supports using
#8 x 3/4" Flat Head Screws
DETAIL C
DETAIL E
DETAIL F
DETAIL G
DETAIL D
(underside view)
Guide wires behind
T-Nuts to follow all
the way through post
to electrical cabinet.
Center Z-Clip left
to right on case.
(See page 7 for
more details)
Add wire extentions as needed. Wire
connectors will not fit into post behind
T-Nuts. Wire extentions much be
attached after wires are routed.
Guide wires down
post to conceal them
and into electrical
cabinet.