Tunturi Platinum Dip Station, Руководство пользователя

Страница: 11 / 12

Platinum by Tunturi
10
Dip Station Owner's Manual
Platinum by Tunturi strives to give you the very best in quality, performance and safety through carefully engineered designs and
excellent workmanship. In order to maintain this high level of quality the preventative maintenance schedule below should be followed.
Clean upholstery, grips, and roller pads with mild soap and water generally after every use. The guide rods, chrome slides and frame
should be cleaned with a cotton cloth. Upon cleaning the guide rods, a thin layer of Silicone or Teflon gel should be applied to each
rod to ensure a glass smooth performance.
An overall inspection should be done before each workout. If the warning and safety decals are worn or have been removed they
should be replaced immediately. The cables and cable systems should be inspected for signs of wear and proper tension. In order to
check cables properly you should carefully run the cable through your fingertips, checking for signs of wear, cracks, burs and thinning
spots. Replace any part at first signs of wear. Cables should be adjusted for proper tension. See assembly instructions for this detail.
All hardware, stops, and adjustments should be checked and tightened as required.
The guide rods on your machine should be cleaned and lubricated regularly. This will ensure a glass smooth performance from your
weight stack. A thin layer of either Silicone or Teflon gel should applied to each rod. Each pillow block bearing and flange bearing has
a grease fittings that must be lubricated regularly. Use general purpose bearing grease and follow the schedule below.
Although cables should be inspected daily, it is important that ALL cables be replaced as directed in the schedule below. Please note
that at any first sign of wear the cable should be replaced immediately.
If there are any questions concerning maintenance, please contact your local Tunturi dealer or contact Platinum by Tunturi directly at:
Daily Weekly Monthly Quarterly Years
Commercial Home Commercial Home Commercial Home Commercial Home Commercial Home
Clean
Upholstery X X
Hand Grips X X
Roller Pads
Guide Rods
Chrome Slides
Frame
X X
Inspect
Overall X X
Safety Decals X X
Cables
Cable Tension
Pulleys
Hardware
X X
Stops
Upholstery
X X
Hand Grips X X
Frame X X
Bushings
Bearings
Lubricate
Guide Rods
Bearings
Replace
Cables
Preventive Maintenance
11
Dip Station Owner's Manual
The Dip Station has a layout dimension of 3’-0” (width) x 2’-3” (length) x 5’-3” (height). There should be a
minimum of 18”, preferably 24”, of working space around the entire unit.
Layout Diagram
www.tunturi.fi