Tunturi FitRun 70i, Руководство пользователя

Страница: 25 / 72

2 5
English
Explanation of display items
Speed
- Shows the actual treadmill speed in workout mode.
- Shows target speed in programming mode.
Pulse
- Shows the pulse rate in workout mode, or “P” when
no pulse is measured.
Distance
- Shows the ran distance workout mode.
- Shows the target distance when being in
programming mode.
- Shows program selection when being in program
mode.
NOTE
• This parameter will only count up/ down
when walking/ running on the treadmill. This
is because of the build in movement sensing
system.
Time
- Shows the ran time in workout mode.
- Shows the target time when being in programming
mode.
NOTE
• If Time window shows “OIL” message, check
section “Lubrication” in this manual.
Calories
- Shows the consumed calories in workout mode.
NOTE
• This parameter will only count up/ down
when walking/ running on the treadmill. This
is because of the build in movement sensing
system.
• This data is a rough guide for comparison of
different exercise sessions which cannot be used
in medical treatment.
Incline
- Shows the actual treadmill incline in workout mode.
- Shows target incline in programming mode.
NOTE
• If there is no operation it will return to “calories”
window after 30 seconds.
Parameter range table
Item Units Initial Original data Pr
ogramming
range Display range
Time Min:Sec 0:00 30:00 5:00~
99:00
0:00~
99:59
Incline Step 0 0 0~15 ~15
Speed Km/H 0.0 0.8 0.8~20 0.8~20
Distance Km 0 1.0 0.50~
99.9
0.00~
99.9
Heart rate Beats
per
minute
P N/A N/A 50~
200
Calories Kilo
Calories
0 50 10.0~
999
0.0~
999
Programs
Quick start
- Press “START” button to start your workout without
any pre-set settings.
- Treadmill will start at minimum speed of 0,8 Km/h,
and maintains the current set incline setting.
- Adjust Speed / Incline manually at any time to
change your workout, and stop/ pause at anytime.
Manual mode
- Press “MODE” button to open programming mode.
- Press “SPEED/ INCLINE” buttons to select P-1
program, press “MODE” button to confirm.
- Press “SPEED/ INCLINE” buttons to set your
desired training time
Default training time is set on 30:00 minutes.
Range 5:00~99:00 min.