Tunturi 14PTRB20000, Руководство пользователя

Страница: 96 / 102

96
Owner
’s manual
•
PLA
TINUM PRO
Buble Description Qty
1 Main frame 1
2 Console mast 1
3 Mast handlebar Assy 1
4 Seat carriage 1
5 Seat back frame 1
6 Seat handlebar 1
7 Rear stabilizer 1
8 Crank axle 1
9L Seat wheel adj. plate (LH) 2
9R Seat wheel Adj. plate (RH) 2
10 Idler wheel Assy. 1
11 Seat stop axle 2
12 Seat position latch 1
13 Backing plate 3
14 Aluminum track 1
15 Rack 1
16 Spacer for stopper axle 4
17 Rubber foot (Ø35×10mm) 2
18 Transportation wheel (Ø54) 2
19 Console assembly 1
19~6 Console top cover 1
19~7 Console bottom cover 1
20 Drive pulley (Ø330) 1
21 Handpulse W/Cable Assy. (RH) 1
22 Rubber foot pad 2
23 Handpulse button head plug 2
24 Button head plug (Ø25.4×2.0T) 2
25 Seat track wheel (Ø38) 8
26 Handpulse wire (300mm) 2
27 Handpulse W/Cable Assy.(LH) 1
28 Crank arm end cap 2
29 Front shroud (LH) 1
30 Front shroud (RH) 1
31 Console mast cover 1
32 Front stabilizer cover 1
33 Bottom cover 1
34 Round disk 2
35 Rear shroud(LH) 1
36 Rear shroud(RH) 1
37 Rear stabilizer cover 1
Spare parts list
38 Drink bottle holder (RH) 1
39 Drink bottle holder (LH) 1
40 Release lever 1
41 Power cord 1
43 Motor controller 1
44 Computer cable (1900mm) 1
45 Hand pulse sensor Assy. 1
46 Sensor W/Cable (1050mm) 1
47 Wire brake coil harness 1
48 DC wire (250mm) 1
51L Crank arm (LH) 1
51R Crank arm (RH) 1
52 Bearing (SKF 6004) 2
53 Bearing (SKF 6203) 2
54 Drive belt 1
55 Induction brake 1
56 Magnet (speed pick-up) 8
57 Gas cylinder 1
58 Steel cable 1
61 Seat 1
63 Mesh seat back 1
64 Handgrip foam 2
65 Hex head bolt (3/8”×2-1/4”) 4
66 Hex head bolt (1/4”×3/4”) 8
67 Hex head bolt (M10×100) 2
68 Hex head bolt (5/16”×5/8”) 8
69 Hex head bolt (M8×63) 1
70 Hex head bolt (M8×32) 1
72 Flat washer (1/4”×13×1T) 16
73 Flat washer (1/4”×19×1.5T) 4
74 Hex head bolt (3/8”×2”) 4
75 Flat washer (Ø17×23.5×1T) 1
76 Flat washer (5/16”×18×1.5T) 7
77 Flat washer (3/8”×19×1.5T) 10
78 Flat washer (3/16”×15×1.5T) 1
79 Knurled lock washer 4
80 Split washer (Ø1/4”) 7
81 Hex blind nut (M5) 8
82 Split washer (5/16”×1.5T) 8
83 Curved washer 2
84 Flat washer (3/8”×25mm×2T) 4
85 C Ring (Ø17) 1