
Ward coupling
38
Ward coupling
At your ComStation
TEL
, you normally monitor only the
rooms in your ward. When needed - e.g. during times with
low work frequency - several wards can be coupled. All calls
and staff presences of the coupled wards are displayed at
all ComStation units of the coupled area. All calls of the
coupled area are forwarded throughout the coupled area.
Ward coupling can be enabled by yourself or from another
ComStation
TEL
.
Your system administrator will have set up several ward
coupling programmes (WCP) for you to select from. Each
ward coupling programme stands for the coupling of spe‐
cific wards. Ask your system administrator which wards are
coupled by which ward coupling programme.
You can enable and disable these programmes. There may
be other active ward coupling programmes which you can‐
not not affect. When a ward coupling programme is active,
the corresponding wards are coupled.
NOTICE!
Automatic ward coupling can be initiated when a
specific call category (e.g. Code Blue / Cardiac alarm), is
raised. Ask your system administrator whether this variant
has been set up for your system.
How to enable or disable a ward coupling programme:
l
Press the “Ward Coupl.” function key
(handset remains hung up).
Ward Coupl.
Содержание ComStation
Страница 1: ...1 7 ComStation Order no 77 0603 00 User Guide Order no 00 8812 71 TEL All the reassurance you need...
Страница 4: ...2...
Страница 10: ...FlamencoR nurse call system 8 ComStation TEL 1 Sample ward...
Страница 44: ...Enable disable a shift 42 Zone 1 Shift 1 Zone 1 Zone 2 Zone 3 Shift 2 Zone 1 Zone 2 Shift 3 37 Example...