1.
2.
Turn On/Off Power
Connect Cable
Plug In Audio Cable
Plug in Audio Cable into Shake and
Audio Device.
(If Audio Device has
Bluetooth
you
must first disable
Bluetooth
before
playing music through cable).
Place fingers over
Touch Sensitive Areas
indicated for 2 seconds.
Shake will flash
then go
Green
Blue
.
POWER ON
Place fingers over
Touch Sensitive Areas
indicated for 5 seconds,
Shake will flash
then turn off.
Red
POWER OFF
Connect with an Audio Cable
PLAY YOUR TUNES
3.
Adjust Volume
Press and hold finger
over right Control Area
to increase Volume.
Shake will flash
at each
increase.
Green
Press and hold finger
over left Control Area
to decrease Volume.
Shake will flash
at each decrease.
Green
VOLUME UP
VOLUME DOWN
Tunebug Shake Quick Set Manual
www.tunebug.com
408.792.7022
Tunebug 830 Stewart Dr. #201 Sunnyvale Ca. 94085 www.tunebug.com 408.792.7022
Charging
Turn off Power before charging.
!Fully Charge Before Operating!
