MANUAL
|
FRONT HUB MIG70
www.tune.de
As of May 2015
Page 3 of 9
Maintenance
Construction of the hub:
This hub is built up from firmly connected parts, i.e. the axle goes all the way through, with endcaps at
both sides, and all parts are fixed exactly in place.
Tune uses specific bearings not available from any other manufacturer. The bearings distinguish
themselves by there unusual high amount of special grease and a radial play adjusted for the use.
The bearings have a double slid sealing, the hub therefore will run comparatively sluggishly when
new. This will change after the first rides, when the grease has been dispersed evenly in the ball-bear-
ings and the seals are working optimally.
Spare parts can be ordered through your local Tune retailer.
Aluröhrchen für Mig70 VR-Nabe, Farbe /
hub-body-bushing for Mig70 front-hub, color
VFarbcode/color code)
Endkappe für King/Princess/Mig70/Dörte, 17mm, 10.0mm, links+rechts, schwarz
end-cap for King/Princess/Mig70/Dörte, 17mm, 10.0mm, left+right, black
NZ0304sw
Einreihiges Rillenkugellager 61803 2RS C3 /
single-row ball bearing 61803 2RS C3
NZ1509
Einreihiges Rillenkugellager 61803 2RS C3/
single-row ball bearing 61803 2RS C3
NZ1509
Endkappe für King/Princess/Mig70/Dörte, 17mm, 10.0mm, links+rechts, schwarz
end-cap for King/Princess/Mig70/Dörte, 17mm, 10.0mm, left+right, black
NZ0304sw
Aluminiumachse 17mm für King/Princess/Mig70/Dörte15, silber
aluminium-axle 17mm for King/Princess/Mig70/Dörte15, silver
NZ0002si
Mig70
BVN01 (+Lochzahl/number of spoke holes)(+Farbcode/color code)
Flansch für Mig70 VR-Nabe, Lochzahl, Farbe /
flange for Mig70 front-hub, number of spoke holes, color
VN001(+Lochzahl/number of spoke
holes)(+Farbcode/color code)
Stand: Oktober 2013
as of: October 2013
