Tundra TUNPLAS45A-DV, Руководство пользователя, Страница: 5 / 20

5
USER MANUAL
TUNPLAS45A-DV v.1.1
SAFETY GUIDELINES
Please read and ensure that you understand all of the operating instructions, safety precautions and warnings in this
Instruction Manual before operating or maintaining this equipment. An accident can often be avoided by recognizing a
potentially hazardous situation before it occurs, and by observing the appropriate safety procedures. Never use this
equipment or modify it in any way that has not been specifically recommended by the manufacturer. Contact a qualified
electrician for advice on any issues relating to electrical safety in your working environm
ent.
GENERAL EQUIPMENT SAFETY
•
Do not operate the machine without reading and understanding the contents of this user manual.
•
This equipment should only be used by competent trained operators.
•
Do not operate under the influence of medication or alcohol.
•
Regularly inspect the plasma cutter for damage before use.
•
Do not use the equipment if damage is detected.
•
Replace any damaged parts before use (contact your dealer for Tundra Industrial approved replacement parts).
•
Always use the machine for its intended purpose, do not modify the equipment for other uses.
•
This equipment should only be repaired by fully-trained or approved engineers.
•
Ensure that the plasma cutter is not connected to the mains power supply before removing the outer casings to carry out repair or
maintenance.
WORKING ENVIRONMENT
•
Only use in clean, uncluttered environments with good ventilation and sufficient light.
•
Do not operate in the vicinity of children or animals.
•
Do not operate in explosive atmospheres, in the presence of flammable liquids, gases or excessive dust.
•
Cutting sparks can ignite dust and fumes.
PERSONAL SAFETY
•
Stay alert, watch what you are doing and use common sense when operating this
equipment.
•
Never use a plasma cutter while you are tired or under the influence of drugs, alcohol or
medication.
•
Arc rays and infrared radiation can injure eyes and burn skin. Always wear suitable Personal Protection Equipment (PPE) that has been tested
to the latest standards and rated for use with this equipment. This includes eye protection such as arc shaded (with a DIN Shade 10 lens rating),
impact safety full face shield, dust mask or respirator, heavy-duty work gloves, non-skid safety shoes and hearing protection.
•
Do not wear loose fitting clothing or jewellery. Ensure long hair is tied back before operating this equipment.
•
Avoid accidental starting. Always ensure the power switch is in the OFF position before plugging in.
•
Do not overreach, ensure that you are working on a firm stable surface with proper footing and balance at all times.
•
Ensure that the plasma cutter is suitably rated for the application before use.
•
Store in a clean dry environment out of the reach of children.
•
Ensure that the plasma cutter is kept clean and well-maintained to ensure safe use and longer working life.
•
Use a qualified service engineer and contact your Tundra Industrial Dealer for any advice required on the safe operation and maintenance of this
equipment.
WARNING:
No responsibility is accepted for incorrect use of this equipment. Incorrect use can result in damage to the equipment and
danger to the user. Warranty will be void in the event of incorrect use. The warnings, cautions and instructions discussed in this
instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator
that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.