4
USER MANUAL
TUNLFTAB300
2. SPECIFICATIONS
Model Number
TUNLFTAB300
Maximum Load:
300 Kilograms
Minimum Height:
240mm
Maximum Height:
750mm
Table Size:
820mm x 520mm
Weight (NW/GW):
60kg / 64kg
3. DESCRIPTION
Heavy-duty construction. Fitted with two fixed and two swivel composite wheels for easy rolling over rough workshop and
warehouse floors. Swivel wheels fitted with foot-operated brake. One-piece hydraulic unit controlled by large rear mounted foot
pedal. Safety release mechanism positioned on handlebar for smooth controlled descent. Models feature safety bars to prevent
inadvertent lowering. Suitable for numerous garage, industrial and warehouse handling applications. Supplied with non-slip
platform cover for added load security. May also be used as a mobile service bench.
4. ASSEMBLY
iMPORTANT:
This item is heavy and requires a minimum of two
people to lift out of its packaging. Alternatively, cut and fold
down flat one end of the box and wheel the truck out.
Fitting the handle:
At the back of the truck there are two
upstanding sockets to receive the bent loop handle (fig.1D).
Partially unscrew the two locking bolts that pass into the sockets
so that they no longer protrude into the sockets. Drop the ends
of the bent chrome handle into the sockets and tighten the bolts
until the handle is held firmly.
Fitting the foot pedal:
Slide the end of the foot pedal into the
socket situated centrally between the two handle uprights. (See
fig.1E). The footpedal retaining bolt (See fig.1F) screws directly
into the material of the foot pedal stem.
Connecting the control cable:
Remove the cable guide bush
(fig.2B) from the free end of the cable and feed the end of the
cable and cable sheath through the cable guide tubes welded
to the handle and the underside of the frame. See fig.1G and
fig.2A. Once the cable has been fed through the guides slide the
bush back over the cable and onto the sheath. F Feed the cable
through the hole in the bush retaining bracket and then through
the hole in the clamping bolt on the actuating lever (fig.2C). Now
screw the guide bush into the bracket (See Fig.2B). Pull the end
of the cable so that there is no play in the movement of the lever
mounted on the handle. Hold the clamping bolt (fig.2C) steady
with a 14mm ring spanner and tighten the nut on the other side
of the lever with another 14mm ring spanner.
fig.1
Содержание TUNLFTAB300
