Tundra TUNLB0.75-3, Руководство пользователя

Страница: 6 / 16

6
USER MANUAL
TUNLB0.75-3 • TUNLB1.50-3
TUNLB3.00-3 • TUNLB6.0
5. MAINTENANCE
IMPORTANT: This equipment must be kept clean and dry and must be maintained in accordance with these instructions. The owner
and/or operator must be aware that repair of this equipment will require specialised knowledge and facilities. Unauthorised parts
may be dangerous and will invalidate the warranty. Contact your Tundra Industrial dealer for repair advice.
Lubrication:
•
Lubricate the load chain and both hook shanks regularly
Equipment Inspections:
•
Before each use of the lever block, an inspection must be performed for damage, and detection of loose or missing parts.
•
Inspection requires the user to look at the lever block for defects and checking the operation of the hooks, the load chain, the
brake device and lubrication of the block without loading it. This is much more than a check but does not normally require any
part of the lever block to be dismantled, other than removal or opening of covers or housings.
•
It is recommended that this equipment is inspected carefully before each use.
Equipment Examinations:
•
Examination of the equipment requires verification that the lever block can safely continue in service including a functional
test of all safety devices (i.e. the braking device etc.) to verify that they operate within the required tolerances. An
examination is more thorough than an inspection.
•
The lever block must be examined immediately, if it has been subject to an abnormal load or shock.
•
It is recommended that such an examination is made by a fully qualified engineer.
•
It is recommended that an annual examination of the lever block is made by a fully qualified engineer.
5.1 DAILY INSPECTION SCHEDULE / BEFORE EACH USE: