Tundra TUNJKBTL10L, Руководство пользователя

Страница: 4 / 12

4
USER MANUAL
TUNJKBTL10L
2. SPECIFICATIONS
Model Number TUNJKBTL10L
Maximum Load: 10 Tonne
Minimum Height: 125mm
Maximum Height: 225mm
Weight (NW/GW): 7.7kg / 8kg
3. DESCRIPTION
This industrial bottle jack is manufactured from heavy-duty steel for strength and durability. Features include:
• Telescopic two-stage hydraulic ram allows for a higher maximum lift than a single stage jack,
while maintaining the same compact closed heights.
• Manufactured from heavy-duty steel for strength and durability
• Low profile design for use on low-slung vehicles
• Machine-welded base for increased strength
• Double sealed oil reservoir for reduced risk of leakage
• Anti-rust, nickel-plated ram piston for smooth operation and long-life
• Carry-handle makes it easy to manoeuvre and transport
• Threaded pump assembly allows for easy maintenance
• Includes 4-section handle for variable leverage
4. ASSEMBLY
Use the parts list and exploded drawing included on the next page as a reference
to help you to assemble this equipment.
The following procedure is recommended:
Before using the jack, purge the hydraulic circuit, in order to eliminate any air from
the system that may have accumulated during transit, as follows:
a) Insert jack handle over release valve and turn anti-clockwise to open valve.
b) Insert jack handle into the handle socket and pump several times to ensure
full internal lubrication and to bleed air from the system.
c) When complete place the handle back over the release valve and turn clockwise to close.
WARNING! Ensure you prepare vehicle and use jack according to Section 1 SAFETY INSTRUCTIONS.
Check that the supporting ground upon which the jack will stand is level and solid and not tarmacadam.
• Position the jack saddle under the vehicle manufacturer’s recommended lifting point ensuring the saddle
is correctly centred beneath the load. Ensure jack is positioned to avoid having to operate it from under the vehicle,
and that the handle is free to move up and down.
• Pump the handle up and down using full stroke range so that the saddle reaches the working height quickly.
• Should the jack become overloaded, a safety overload valve will open, and stop the vehicle from lifting.
• Position axle stands under the vehicle before attempting any work.
• Lowering the load.
• Ensure the axle stands are removed and that there are no persons or obstacles beneath the vehicle,
or in the path of its descent.
• The lowering speed is controlled by the amount you turn release valve. Turn anti-clockwise and lower carefully,
avoiding sudden release.