Tundra TUNDRMAGM40-110, Руководство пользователя

Страница: 4 / 12

USER MANUAL
TUNDRMAGM40-110
TUNDRMAGM40-230
4
1. INTRODUCTION
This portable magnetic drill is designed for drilling holes in steel fabrication work. It is an ideal portable drilling solution equally suited for use in
building sites or the workshop environment and can be used to cut in horizontal, vertical and overhead positions.
The magnetic drill uses an annular hole cutter (sometimes called a slugger bit) to cut clean and accurate holes without pre-drilling or step drilling.
After cutting through the steel the cutter produces a "slug" (a cylindrical lump of steel) that falls from the centre of the cut.
2. SPECIFICATIONS
TUNDRMAGM40-110 TUNDRMAGM40-230
Maximum Core Drill Diameter: 40mm 40mm
Maximum Cutting Depth: 35mm 35mm
Magnetic Adhesion: 14500N / 1478kg 14500N / 1478kg
Voltage ~ Frequency: 110V ~ 50Hz 230V ~ 50Hz
Motor: 1650W 1650W
No Load Speed: 500 rpm 500 rpm
Dimensions: 26 x 8 x 25cm 26 x 8 x 25cm
Weight: 8.5kg 8.5kg
3. EQUIPMENT GUIDE
Number Part Name
1 Power Cable
2 Motor Housing
3 Control Panel (Motor & Magnet On/Off)
4 Gear Box
5 Arbour
6 Annular Hole Cutter (Slugger Bit)
7 Magnetic Base
8 Feed Control
9 Carry Handle
1
2
3
4
5
6
7
8
9