Tumi TUWEB, Руководство пользователя

Страница: 14 / 18

To reduce the risk of fire or electric shock, do not expose the
Tumi Earbuds to rain or moisture while charging. The Tumi
Earbuds should not be exposed to dripping or splashing,
and objects filled with liquids, such as vases, should not be
placed on or near it while being charged or charging other
devices. As with any electronic products, use care not to
spill liquids into any part of the product. Liquids can cause
a failure and/or a fire hazard. The power supply must be
used indoors only. Make no modifications to the product
or accessories. Unauthorized alterations may compromise
safety, regulatory compliance, and system performance, and
will void the warranty. Do not place any flame sources, such
as lighted candles, on or near the Tumi Earbuds. The Tumi
Earbuds contains small parts that may be a choking hazard
and is not suitable for children under age 3. Do not continue
charging the battery if it does not reach full charge within
the specified charging time. Overcharging may cause the
battery to become hot, rupture, or ignite. If you see any heat
deformation or leakage, properly dispose of the battery. Do
not attempt to charge the battery in temperatures outside
the range of 32°-104°F (0°-40°C). If the battery begins to leak,
do not allow the liquid to come in contact with your skin or
eyes. If contact has been made, wash the affected area with
plenty of water and seek medical attention immediately. Do
not expose the product or battery to excessive heat, including
direct sunlight or fire and storage or use inside cars in hot
weather, where it can be exposed to temperatures in excess
of 115°F (60°C). Doing so may cause the battery and power
supply to generate heat, rupture, or ignite. Using the product in this manner also may result in a loss of performance and
a shortened life expectancy. Extended exposure to direct
sunlight may damage the external appearance and material
qualities. Do not step on, throw, or drop batteries or the power
supply or device, or expose them to a strong shock. Do not
pierce, crush, dent, or deform the batteries or power supply
in any way. If either becomes deformed, properly dispose of
it. Do not short-circuit batteries. Do not attempt to service
the Tumi Earbuds yourself. Opening or removing covers may
expose you to dangerous voltages or other hazards and
will void the manufacturer’s warranty. To prevent risk of fire
or electric shock, avoid overloading wall outlets, extension
cords, or integral convenience receptacles. Your Bluetooth
device (mobile phone, music player, tablet, laptop, etc.) must
support the A2DP Bluetooth profile in order to work wirelessly
with your new Tumi Earbuds. The A2DP profile is supported
by most recent mobile products with built-in Bluetooth
capability. Please refer to your device’s user manual for
details and instruction regarding the Bluetooth profiles it
supports. This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device
must accept any interference received, including interference
that may cause undesired operation.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
WARNINGS, CAUTIONS & LEGAL INFORMATION