Tumbl Trak™
www.tumbltrak.co.uk
44 (0)2971 167 949
3
Fig.4
Fig.3
Host
Fig. 2
II. Rail and Frame Assembly
1.
Rail Assembly for 20’ and 30’ Units
A.
Assemble hinge rails prior attaching to legs.
B.
Use the attachment plates to fasten the 15’ hinged rail to the 2.5’ extension rail piece (Appendix
A) with the
3/8-16 x 3-1/4
Hex Bolts and Nuts (See Fig. 1). Ensure the threads of the screws are
facing inside the rail (See Fig 2). Secure with Hex Nuts.
*Refer to Appendix A. assembly Diagrams
2.
Frame Assembly
A.
Lay the 2 assembled Porta Trak
rails parallel to each other
approximately 6 feet apart with
holes facing inward.
B.
Stand the legs upright so that the
plastic cap end is on the floor.
The legs will run perpendicular to
the length of the Porta Trak (like
railroad ties). Place legs with casters as indicated in
Appendix A
(See Fig. 1).
C.
Connect the legs to the rails by placing rails onto legs (See Fig. 2). Install the
‘3/8-16 x 1/4
Hex
Bolts provided through the holes indicated in Fig. 3&4 and fasten nuts.
The Hex Bolts provided
are meant to be longer than the Porta Trak legs to prevent damage to the aluminum frame
from over tightening.
*Refer to Appendix A. Assembly Diagrams
Fig. 1
Fig. 1
Fig. 2
