www.tumbltrak.com 1-800-331-4362
5
Connecting the Mini Mountain to a Catcher:
To connect the units together, place the low side of the Catcher next to an end of the Mini
Mountain while they are
deflated.
Use the black straps to connect the d-rings on the corners of
both units together (See Fig. 4 Above). Place the 2’ wide x 7’ long Velcro connector to the gap
where the Mini Mountain and Air Trak meet (See Fig. 9 Above).
The catcher will need its own air blower if a Y-Splitter is already being used to connect the Air
Trak and Mini Mountain. The Y-Splitter may still be used to connect the Mini Mountain and
Catcher if you choose to use one blower on the Air Trak.
If you choose to use the Y-Splitter follow instructions on page 5.
Additional Air Trak and Accessories information:
One blower will only provide enough air for two air products. No three air products can be
connected together using one blower.
Using an air blower for each air product will provide maximum capacity of air flow for each
product.
A 30ft Air Trak should have its own air blower. One air blower will not provide enough air to fill
a 30ft Air Trak and Air Trak accessory.
All
air products should be connected while
deflated
before turning on blowers.
