SVIZZERA
PLUS
_ CONSIGLI DI INSTALLAZIONE E MANUTENZIONE / RECOMMENDATIONS FOR INSTALLATION AND MAINTENANCE
www.tullizuccari.com
01
.2009
Pag 5 di 6
ASSEMBLY PROCEDURES
A_ UNPACKING THE PRODUCT
•
Remove the product parts from the packaging taking care to open the pack where indicated.
•
The pack contains: 1) The unit 2) Steel brackets, wall plugs, screws for fixing to the wall 3) Assembly instructions
Before disposing of the packaging wait until the product has been assembled and checked that it is in good working order.
B_ INSTALLING THE BRACKETS FOR THE WASHBASIN UNIT AND SIDEBOARD (01, 02, 03)
•
Decide on the position of the cabinet on the wall, and in order to install the counter-top at a height of 860 mm from the floor (the
recommended height) install the brackets (AE) on the wall, using the dowels which are included (8 mm diameter) at a height of (*H
ASSE X 01, 02) from the floor,
as shown in the technical illustration which is included.
•
The distance L between the Y AXIS (“ASSE Y”) going through the middle of the brackets (EA) will depend on the width of the unit (M)
as can be seen in the diagram that follows.
•
You are advised to use a level to check that the brackets (EA) are exactly horizontal (03) and also to check that the wall supports well
before fixing the unit.
M 1450 1600 1800
L1 715 790 890
L2 575 650 750
M 500 700
900 1050 1250
L
394 540 740 890 1090
D
53 80 80 80 80
M 1450 1600 1800
L3 352 390 440
L4 586 660 760
