28. The heater is at high temperature when in use. Unplug the
heater and wait until it cools down before cleaning.
29.
Don’t use this heater in place where causticity or volatile air
exists, such as dust, steam, gas, etc.
30.
Don’t use this heater as a cloth drier or towel drier.
31.
Don’t use this heater as a sauna heater.
32.
Don’t use this heater in place of animal propagating and raising.
33. The heater should be plugged in a socket, which is easily visible
and reachable.
34. Do not use this heater in the immediate surroundings of a bath,
a shower or a swimming pool.
35. Do not use this heater with a programmer, timer, separate
remote-control system or any other device that switches the
heater on automatically, since a fire risk exist if the heater is
covered or positioned incorrectly.
36. Place the heater outside or in a large open area and well away
from any obstructions such as branches or where the heater is
close to any objects that can be affected by heat, such as
furniture, curtains or other inflammable objects (minimum
distance 1 meter).
37. The instruction manual shall provide adequate instructions for
connection to the supply ensuring an equivalent protection!
38. If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in
order to avoid a hazard.
Operation
Connect the power cable to a 13 amp supply which is located in a safe,
dry area.
The switch on the heater is used to control the Heater. When the
position mean on the
【
ON
】
, the first indicator light will be turn red,
the heater will be in standby mode. The
【
OFF
】
position will turn off
the Heater.
The panel control: