Remove all packing material and accessories.
Examine the oven for any damage such as
dents or broken door. Do not install if oven is
damaged.
Countertop Installation
Cabinet:
Remove any protective film found
on the microwave oven cabinet surface.
Do not remove the light brown Mica cover
that is attached to the oven cavity to
protect the magnetron.
Hub (underside)
Glass tray
Turntable ring assembly
a. Never place the glass tray upside down. The glass
tray should never be restricted.
b. Both glass tray and turntable ring assembly must
always be used during cooking.
c. All food and containers of food are always placed
on the glass tray for cooking.
d.
If glass tray or turntable ring assembly cracks or
breaks, contact your nearest authorized service
center.
Turntable Installation
Turntable shaft
The accessible surface
may be hot during
operation.
Installation procedure
Connect the appliance only to a properly grounded power socket.
If the power socket is not suitable for connecting the plug on the power cord, then it must be replaced
with a suitable power socket by a qualifi ed service technician according to valid local legal codes.
The cabinet into which the appliance is to be installed should not have the rear wall attached in order to
ensure maximum possible air circulation and ventilation.
The minimum installation height is 85 cm
Do not cover the ventilation outlets and inlets.
Do not bend the power cord, do not expose it to excessive pressure and do not damage it in any way.
7
