Tuft & Needle Adjustable Frame, Руководство пользователя

Страница: 8 / 56

8
Intended Use
The T&N Adjustable Frame is an electrically
controlled Bed Frame. Its sole intended use
is described in this documentation. The T&N
Adjustable Frame is designed for indoor use
and household use only. Outdoor use is
forbidden. The Bed Frame is operated by a
Remote Control.
The T&N Adjustable Frame may only be used
with suitable mattresses. Suitable mattresses
must comply with Federal Register 16 CFR
Part 1633. If unsure, ask your mattress
provider if your mattress is compatible with
electrically adjustable Bed Frames. The Bed
Frame must not be used without a mattress,
or with water-based mattresses. The Bed
Frame may only be assembled and used by
adults. It is not designed for children or animals.
The recommended maximum load on the Bed
Frame is 1000 lbs (including the mattress).
Weight must be distributed evenly. No
individual Platform is designed to support
or lift this weight. Users should get in and
out of bed only when the Bed Frame is in a
flat (horizontal) position. Do not place your
entire weight on the head or foot section,
especially if the Bed Frame is in an elevated
position. Do not stand on the Bed Frame
or Platforms at any time. Exceeding the
recommended maximum load could damage
the product and void the warranty.
Usage outside of the intended use described
in this Owner’s Manual is only allowed with
written consent by Tuft & Needle. Improper
operation or usage outside of the intended
use can result in personal injury and damage
to the system. Liability and warranty claims
are void in cases of usage outside of the
intended use.
Hospital / Medical Disclaimer
The T&N Adjustable Frame is not designed to comply with medical or hospital
standards. It is therefore not suitable for domestic or commercial medical use.
• Do not use the Bed Frame near to tent type oxygen or therapy equipment
• Do not use the Bed Frame near to other potentially explosive gases