Tufline GB Series Скачать руководство пользователя страница 2

Introduction ii

TO THE DEALER:
Assembly and proper installation of this product is the responsibility of the Monroe Tufline dealer. Read 

manual instructions and safety rules. Make sure all items on the Dealer’s Pre-Delivery and Delivery 

Check Lists in the Owner’s/Operator’s Manual are completed before releasing equipment to the owner.
The dealer must complete the Warranty Registration located on the Monroe Tufline website.

TO THE OWNER:

Read this manual before operating your Monroe Tufline equipment. The information presented will pre-

pare you to do a better and safer job. Keep this manual handy for ready reference. Require all opera-

tors to read this manual carefully and become acquainted with all the adjustment and operating proce-

dures before attempting to operate. Replacement manuals can be obtained from your Monroe Tufline 

dealer.

The equipment you have purchased has been carefully engineered and manufactured to provide 

dependable and satisfactory use. Like all mechanical products, it will require cleaning and upkeep. 

Lubricate the unit as specified. Observe all safety information in this manual and safety decals on the 

equipment.

For service, your authorized Monroe Tufline dealer has trained mechanics, genuine Monroe Tufline 

service parts, and the necessary tools and equipment to handle all your needs.

Use only genuine Monroe Tufline service parts. Substitute parts will void the warranty and may not 

meet standards required for safe and satisfactory operation. Record the model number and serial num-

ber of your equipment in the spaces provided:

Model:____________________________________ Date of Purchase:_________________

Serial Number: (see Safety Decal section for location)_______________________________

Dealer Name: __________________ Dealer Contact Information:______________________

Provide this information to your dealer to obtain correct repair parts.

Throughout this manual, the term IMPORTANT is used to indicate that failure to observe can cause 

damage to equipment. The terms CAUTION,WARNING and DANGER are used in conjunction with the 

Safety-Alert Symbol, (a triangle with an exclamation mark), to indicate the degree of hazard for items 

of personal safety.

DANGER

WARNING

CAUTION

IMPORTANT

NOTE

This Safety-Alert Symbol indicates a hazard and means ATTENTION!

BECOME ALERT! YOUR SAFETY IS INVOLVED!

Indicates an imminently hazardous situation that, if not avoided, will result in 

death or serious injury.

Indicates a potentially hazardous situation that, if not avoided, could result in 

death or serious injury, and includes hazards that are exposed when guards 

are removed.

Indicates a potentially hazardous situation that, if not avoided, may result in 

minor or moderate injury.

Indicates that failure to observe can cause damage to equipment.

Indicates helpful information.

Содержание GB Series



















Отзывы: