
High/Low Pulley System
2
IG. 3
Place the
Bottom Assembly Holder (#24)
under the
Smith-
Half Cage’s Bottom Cross Brace
. Next, locate the
Center Upright
#19)
and place it on top of the
Smith-Half Cage’s Bottom Cross
Brace
, as shown above, then secure this assembly group into place
sing two Hex Head Cap Screws 3/8-16 X 3 1/4 (#86), four Flat Washers
SAE 3/8” (#71), and two Nylon Insert Lock Nuts 3/8-16 (#99).
FIG. 2
Using a rubber mallet, insert two Plastic insert Caps 2” Rd
(#113) into the tube-ends of
Adjustable Foot Support (#25).
Then
insert two Plastic Insert Caps 2 X 3 (#112) into the tube-ends of th
Bottom Assembly Holder (#24)
.
Next, insert the
Adjustable Foot Support (#25)
into the receptacle o
the
Bottom Assembly Holder (#24)
.
Caution:
It is strongly recommended to use another person
in assisting with the following assembly.
Assembly steps only for THL-78WS
A
B
25
113
113
118
112
24
112
19
25
24
Smith-Half Cage’s
Bottom Cross Brace
19
24
25
23
123
123
23
24
23
23
24
Assembly Instruction
IG. 1
The
High/Low Pulley System
is an option for the Smith-Half
Cage Series.
Picture
A
shows the Smith-Half Cage
with out
the
High/Low Pulley.
Picture
B
shows the same unit with the
THL-78
attached to it.
If assembling a THL-78 (Free Weight) skip to Fig. 8
FIG. 4
Insert the two
Guide Rods (#23)
into the receptacles of th
Bottom Assembly Holder (#24)
. Next, slide the Rubber Donuts (#123
onto the
Guide Rods (#23)
.
Note:
Lubricate the
Guide Rods (#23)
with silicone spray or
teflon spray lubricant at this time.