FIG. 5
Slide the assembled
Top Plate Selector Bar (#6)
onto the
Guide Rods (#3)
allowing it to rest on top of the completed Weight
Stack.
Note:
Be sure
Selector Pin
on the
Top Plate Selector Bar
(#6)
is facing out, as shown above, before sliding the
Top
Plate Selector Bar (#6)
onto the
Guide Rods (#3)
.
FIG. 7
Assemble four Nylon Pulleys 4 1/2 Rd. (#15-Labeled D, E,
I, J) to the
Top Upright Connector (#27)
using four
Cable Retainer
Brackets (# 31)
, two Hex Head Cap Screws 3/8-16 X 4 1/2 (#50),
four Flat Washers SAE 3/8” (#53), and two Nylon Insert Jam Lock
Nuts 3/8-16 (#51).
FIG. 6
Maneuver the two
Guide Rods (#3)
into the holes on the
bottom side of the
Guide Rod Retainer (#4)
.
FIG. 8
Attach the
Top Upright Connector (#27)
to the
Guide
Rod Retainer (#4)
and the
Weight Stack Frame (#1)
using two Hex
Head Cap Screws 1/2-13 X 3 1/2 (#56), four Flat Washers SAE
1/2” (#60), and two Nylon Insert Lock Nuts 1/2-13 (#59).
3
SP-407 Single Column
3
84
6
3
3
4
1
3
27
31
31
31
E
D
J
I
27
1
4
3
3
