Step 17
b
Spring Loaded Pin Adjustment
FIG. 6
Once you have the handle working properly, tighten
the bottom
Adjusting Nut
.
FIG. 7
Before using the machine, be sure that the
Plunger
fi ts easily into all seven (7) of the
Adjustment Plate
Holes
and that the end of the
Plunger
does not make contact with
the
Adjustment Plate
while changing from one position to
the other.
If handle is loose or needs adjusting, please refer to
FIG.5
&
FIG. 6.
FIG. 8
This illustration depicts the ideal setting for the
plunger,
as shown fl ushed with the outside surface of the
Adjustment Plate
.
Cable Assembly
Handle Engages and
Disengages Plunger
Disengaged Plunger
Adjusting Nut
Adjusting Nut
25
AXT-2.5 AXT- Cable Motion Plus Home Gym
FIG. 5
To increase or decrease the tension and play of the
Adjusting Handle
, perform the following steps:
Loosen the
a.
Adjusting Nuts
with two 3/4 wrenches
.
Tighten the top
b.
Adjusting Nut
until the
Handle
completely
disengages the
Plunger
from the
Selector Plate.