background image

TNT SERIES PRESSURE WASHER

WARRANTY

TNT LIMITED NEW PRODUCT WARRANTY

PRESSURE WASHERS

WHAT  THIS  WARRANTY  COVERS

All TUFF PRESSURE WASHERS are warranted by TUFF to the original purchaser to be free from defects in materials and
workmanship under normal use, for the periods specified below. This Limited Warranty is subject to the exclusions shown below,
is calculated from the date of the original purchase, and applies to the original components only. Any parts replaced under this
warranty will assume the remainder of the part’s warranty period. In the case of defect, please return with a copy of your proof
of purchase, to the dealer from whom you purchased your pressure washer for possible warranty.

THREE  YEAR  PARTS  AND  NO  LABOR  WARRANTY:

Components manufactured by TUFF, such as frames, handles, coil wraps, float tanks, belt guards, and coils.  Internal compo-
nents on the oil-end of all pressure washer pumps.

NINETY DAYS MINIMUM  ON  PARTS  AND  NO  LABOR  WARRANTY:

All other components, excluding normal wear items as described below, will be warranted for ninety days on parts.  Parts
warranty will be for ninety days regardless of the duration of the original component manufacturer’s warranty.

WARRANTY  PROVIDED  BY  OTHER  MANUFACTURERS:

Motors, generators, and engines, which are warranted by their respective manufacturers, are serviced through these manufac-
turers’ local authorized service centers. TUFF cannot provide warranty on these items.

WHAT  THIS  WARRANTY  DOES  NOT  COVER

This warranty does not cover the following items:

1.

Normal wear items, such as nozzles, guns, discharge hoses, wands, quick couplers, seals, filters, gaskets, O-rings,
packings, pistons, pump valve assemblies, strainers, belts, brushes, rupture disks, fuses, pump protectors.

2.

Damage or malfunctions resulting from accidents, abuse, modifications, alterations, incorrect installation, improper
servicing, failure to follow manufacturer’s maintenance instructions, or use of the equipment beyond its stated usage
specifications as contained in the operator’s manual.

3.

Damage due to freezing, chemical deterioration, scale buildup, rust, corrosion, or thermal expansion.

4.

Damage to components from fluctuations in electrical or water supply.

5.

Normal maintenance service, including adjustments, fuel system cleaning, and clearing of obstructions.

6.

Transportation to service center, field labor charges, or freight damage.

WHAT  YOU  MUST  DO  TO  OBTAIN  WARRANTY  SERVICE

In order to obtain warranty service on items warranted by TUFF, you must return the product to the dealer from whom you
purchased, freight prepaid, with proof of purchase, within the applicable warranty period.  For warranty service on components
warranted by other manufacturers, the TUFF Dealer can help you obtain warranty service through these manufacturers’ local
authorized service centers.

LIMITATION  OF  LIABILITY

TUFF’S liability for special, incidental, or consequential damages is expressly disclaimed. In no event shall TUFF’S liability
exceed the purchase price of the product in question. TUFF makes every effort to ensure that all illustrations and specifications
are correct, however, these do not imply a warranty that the product is merchantable or fit for a particular purpose, or that the
product will actually conform to the illustrations and specifications. THE WARRANTY CONTAINED HEREIN IS IN LIEU OF ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF FITNESS FOR A PARTICU-
LAR PURPOSE.
 TUFF does not authorize any other party, including authorized Dealers, to make any representation or  prom-
ise on behalf of TUFF, or to modify the terms, conditions, or limitations in any way. It is the buyer’s responsibility to ensure that
the installation and use of TUFF products conforms to local codes. While TUFF attempts to assure that  its products meet
national codes, it cannot be responsible for how the customer chooses to use or install the product.

TUFF PRESSURE WASHERS

659 Randall Wobbe Ln.  •  Springdale, AR 72764  •  1-800-772-8833

Содержание TNT-503021E



























Отзывы: