A
bout the AP-5MPS_AP-5MPD Multi-Press Station
Congratulations on your new purchase of the AP-5MPS_AP-5MPD
Multi-Press Station. We hope you are completely satisfi ed with this
product and wish you many years of enjoyment.
T
uff Stuff Equipment
This Tuffstuff product has been built to precise quality standards
and has been carefully packaged to ensure that damage will
not occur during shipment. The Limited Warranty and signature
indicating fi nal inspection has been conducted by our line foreman,
is an expression of our confi dence in the completeness, the
materials, and workmanship of this product.
W
arranty
SEE A COPY OF WARRANTY ON BACK PAGE.
R
egistration Card
To avoid unnecessary delays in warranty service and to insure that
a permanent record of your purchase is on fi le with our factory,
be sure to complete the warranty registration card and send it to
TuffStuff Fitness Equipment today.
P
rior to the Assembly of the AP-5MPS_AP-5MPD
1. We advise you to consult your local Tuff Stuff retailer if you
should have a question or problem regarding the proper
assembly of this unit.
2. Neatly organize and identify all parts according to the Parts List
and the Exploded View Diagram.
T
ool Requirements
1. One 7/8” combination wrench
2. One 3/4” combination wrench
3. One 9/16” combination wrench
4. One 1/2” combination wrench
5. One ratchet
6. One 3/4” socket
7. One 9/16” socket
8. One rubber mallet
9. Windex or household glass cleaner
10. Measuring tape
11. Utility knife
1
Note:
Due to continuing product improvements, specifi cations and designs are subject to change
without notice.
S
peci
fi
cations
1. Maximum Wt. Capacity
- 200 lbs.
2. Total Machine Weight
- 185 lbs.
AP-5MPS_AP-5MPD Multi-Press Station
Step 1 Bottom Cross Brace Assembly
Assembly List
Item #
Description
Qty.
Item #
Description
Qty.
1
ADJUSTABLE PULLEY BRACKET
1
44
HEX HEAD CAP SCREW GR-5 B/O 3/8-16 X 1 3/4
3
6
BOTTOM CROSS BRACE
1
46
HEX HEAD CAP SCREW GR-5 B/O 3/8-16 X 3 1/4
2
23
PULLEY 3/8” X 4 1/2”
2
56
NYLON INSERT JAM LOCK NUT B/O 3/8-16
3
34
FINISHED HEX NUT B/O 1/2-13
2
58
NYLON INSERT LOCK NUT B/O 3/8-16
2
37
FLAT WASHER SAE B/O 3/8”
10
80
SPLIT LOCK WASHER Z/P 1/2”
2
A
Assemble
the
Adjustable Pulley Bracket (#1)
to the
Weight Stack Frame
using hardware shown.
B
Attach a Pulley 3/8 X 4 1/2 (#23) to the
Weight Stack Frame
using hardware shown.
C
Affi
x
the
Bottom Cross Brace (#6)
to the
Weight Stack Frame
using hardware shown.
D
Attach a Pulley 3/8 X 4 1/2 (#23) to the
Bottom Cross Brace (#6)
using hardware shown.
