Saving Preset Con
fi
gurations
Before a con
fi
guration can be saved, it must be set up via the UserOps menu. Once the
con
fi
guration is set up as desired, save the con
fi
guration by performing the following:
At any top-level menu, turn the
Select
knob until
SavePS
appears on the display.
Press and release the
Select
knob.
Preset-1
appears on the display.
Turn the
Select
knob until the desired preset location is displayed and then press and
release the
Select
knob.
Saving
appears on the display and then
Atten
appears on the display.
The con
fi
guration is saved.
Loading Preset Con
fi
gurations
When a con
fi
guration has been set up via the UserOps menu and saved via the SavePS menu,
load the con
fi
guration by performing the following:
Turn the
Select
knob until
LoadPS
appears on the display.
Press and release the
Select
knob.
Preset-1
appears on the display.
Turn the
Select
knob until the desired preset location is displayed, and then press and
release the
Select
knob.
Loading
appears on the display and then
Atten
appears on the display.
The con
fi
guration is loaded.
This procedure overwrites the contents of the selected preset location. Be certain that the existing con
fi
guration
is not needed before continuing.
Warning
1.
2.
3.
1.
2.
3.
PA5 Programmable Attenuator | 14
