Tuchel Big Скачать руководство пользователя

Страница: 40 / 56

Maintenance

Pos: 60 /Tuchel/Wartung/Wartung @ 1\mod_1199958318859_21.doc @ 10476

7 Maintenance

This chapter contains the scheduled maintenance that is to be
performed by qualified personnel or the operator.

Perform the described maintenance work in the specified time
intervals.

Safety measures

•

Observe the applicable regulations when handling fuels. This

also applies to the storage and disposal.

•

Observe the applicable provisions and safety regulations for

the respective lubricant and consumable item.
– Wear suitable protective clothing.

•

All safety information from chapter

Safety

must be taken into

account and applied.

•

The industrial safety and accident prevention regulations of the

relevant Employers' Liability Insurance Association are
binding.

Safety-relevant parts

•

Damaged safety-relevant parts cause accidents. Replace

damaged parts immediately.

The following parts in particular are safety-relevant parts:
– Safety elements (e. g. spring cotter pins, locking pins,

fastening bolts)

– Hydraulic components (e. g. hoses, fittings, valves)

•

The safety-relevant parts must be checked regularly by a

specialist repair shop and replaced.

Maintenance preparation

1. Park the host vehicle with the accessory equipment on level

and solid ground.

2. Operate the operating lever of the working hydraulics to lower

the quick-change unit or the accessory equipment to the
ground.

3. Activate the holding brake.
4. Place all operating levers of the working hydraulics in the null

position.

5. Shut off the engine of the host vehicle and keep the ignition

key in safe custody so that the machine is secured against
unauthorised starting.

Pos: 61 /Tuchel/=============== @ 1\mod_1202294702901_0.doc @ 11563

Содержание Big

























































Результаты поиска

Содержание Big

Отзывы:

Похожие инструкции для Big

Бренды по названию

Популярные бренды

Tuchel Big, Инструкция по эксплуатации

Результаты поиска

Содержание Big

Отзывы:

Похожие инструкции для Big

Бренды по названию

Популярные бренды