LED-Resistor/Widerstand
Farbcode/colorcode
Value/Position
Pre-resistors LED orange.
R 15,16
for orange LEDs we use
220 Ohm
Depends of the LED type .
330 Ohm works in the most
cases.
2 x 220...390 Ohm
R 15,16
The connectors
connector male
Farbcode/colorcode/code
Value/Position
Connector male
K3,K4= 2x10 pin
K14= 2x3pin
Mic-Con= 1x2 pin
Attention the plugs K3,4,14 and MIC-con go down
The mic connector is pushed through the holes from the back and soldered from above.
Then bend the two pins in such a way that they lie horizontally to the board.
17
