Tubeline BF5000SL, Руководство оператора

Страница: 21 / 48

Self Loading Balefeeder BF5000SL -
Section 6: Maintenance 6-3
Complete all checks and services in this section at the hour interval shown.
NOTE: Failure to complete the required maintenance at intervals shown can cause unnecessary
downtime.
The recommended intervals are for average conditions. Perform maintenance more often when
operating the Tube-Line Accelerator under adverse conditions.
General checking of bolts, security pins and split pins must be carried out initially after the first 8
hours of use. Subsequently, check every 50 hours and whenever the machine is laid up for extended
periods.
WARNING
Before performing any adjustments or maintenance on the Tube-Line, observe these safety
precautions:
Turn off tractor, set parking brake, remove key and wait for all moving parts to stop before leaving
cab.
Read
Maintenance Safety, pg.2-2
.
Failure to comply could result in death or serious injury.
Daily Maintenance
Careful inspection and service of the Bale Feeder prior to operation each day will prevent needless
breakdowns and delays in the field. Make the following checks and adjustments.
1. Be alert for loose hardware and tighten or replace as required.
2. Lubricate the BF5000SL according to the instruction in the “Lubrication” section of this manual.
Preseason Service
Prior to beginning the harvest after offseason storage, take the following steps be certain the Tube-
line BF5000 is in good condition.
Check slot opening guide, make sure it is tight and that the beater blades are clear.
Refer to
Beater Guide, pg.4-2
.
Lubricate the Tube-line BF5000 according to
Grease Points, pg.6-1
.
Tighten or replace any damaged or missing fasteners.
End of Season Service
Prior to storing the Tube-line BF5000 during the off season, follow these steps to ensure easier
preparation for the next season and longer Tube-line BF5000 life
• Pack all grease points with grease. Refer to
Grease Points, pg.6-1
.
• Remove all crop material from the BF5000.