manualshive.com logo in svg

Tubeline Accumul8, Руководство оператора

Поделиться
Скачать
Tubeline Accumul8 Скачать руководство пользователя страница 19

3-6 

Section 3 - Adjustments - 

Ac2/+4

Endgate Trip Adjustment

The bale trip arms have two settings, the holes on 

the side and the threaded rod on top. The holes on 

the side are used for different bale lengths, and the 

threaded rod is used for fine tune adjustment.

NOTE:

 Setting the trip arms too far ahead on the 

Accumulator and the bale will trip too soon, and you 

will not get a tight pack, too far back and it won’t trip 

the back gate at all.

NOTE:

 Use the threaded rod the fine tune adjust 

when the endgate opens, not enough tension and the 

endgate won’t open, too much and it will trip too soon, 

and you won’t have a tight pack.

Endgate Adjustment

The endgate latches, release the endgate, to allow 

the bales to exit the Tube-line Accumulator.

NOTE:

 The two jam nut should be set so that the 

hooks are resting on the gate a 1/32”. 

The bale exiting tension can be set to encourage a 

tighter pack.

Содержание Accumul8
































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды