PoS100 - version 2019
General Warning Informations
•
Manufacturers and distributors are not liable or responsible for the consequences
of inappropriate use, installation errors or operation errors of this product due to
disregard of the manual. The building and installation should only be completed by
qualified personnel.
•
The contents of this manual are subject to change without notice.
•
The attenuator can get hot after longer use!
•
Always choose the matching impedance of the amp output, the cabinet and the PoS
(e.g. 8 ohm amp output, 8 ohm cab and 8 ohm at the impedance selector of the
PoS)
•
Only use the attenuator with a valve amp!
•
Attention: if the amp is used at maximum power and a high attenuation is dialed in
at the PoS the wear of the power tubes and the stress for the parts inside the amp
(e.g. the output transformer) will rise and can lead to damages
•
Adjust the attenuation with care!
•
To get the best sound results it is not always necessary to dial in maximum volume
on the amp, this is a common mistake
•
Use the PoS always in combination with a speaker cabinet, the PoS is no dummy
load
•
The maximum continuous power of 100 Watt must not be exceeded, otherwise it
may lead to damages or even destruction of the unit
Tube-Town GmbH - www.tube-town.net
Page 4
