TT MIDI-Switcher - Version 2019
104 Store Preset
assign current switching states to the program currently set
105 change mute time
Value corresponds to new mute time, default setting: 80 ms
106 Mute I5-I8 ON/OFF
Activate / deactivate mute function for inputs I5-I8
Programming your own switching states
Of course, own switching states can be assigned to individual programs and be activated
directly by calling the respective program number (Program Change). Proceed as follows:
Set the desired program with the "Program Change" command. This must be done using
external MIDI controllers, i.e. PC 4.
Then set the desired switching states, either with external footswitches and front panel
controls or via the controller change commands listed above. Example: A2 to ON, A5 and
A6 to ON, remaining outputs all OFF.
The configuration is finally saved by pressing the memory key, or alternatively by controller
change 104.
Finished.
If you want to recall this switching state at a later time, simply send "Program Change 4"
command to the MIDI switcher.
Hints
Up-to-date information, additions and additional software (MIDI SEND), as well as sample
images of the build can be found on the project page. Here is also informations on the
separately available μC for a looper version available.C for a looper version available.
Tube-Town GmbH - www.tube-town.net -
Page 8
