Tube-Town LND150 FX-Loop, Руководство пользователя

Страница: 7 / 12

FX-Loop Module LND150
General hints for integration
Depending on the circuit the loop is integrated in it may be necessary to adjust the input
voltage divider (R13/R14). As a starting point a ratio of 1:10 is recommended for testing if
the loop or the effects distort in an unpleasant way. If the signal level is too high the next
higher resistor value for R14 can be tested.
Input Voltage Divider
The following table shows an overview of possible resistor combinations for the input
voltage divider and the resulting ratio. The needed resistors for the listed combination are
included in the kit (since batch 19.06.2019).
R14 R13 ratio
470 kOhm 100 kOhm ca. 1:5
1 MOhm 100 kOhm ca. 1:10
1,5 MOhm 100 kOhm ca. 1:15
2,2 MOhm 100 kOhm ca. 1:22
C7 is optional, if the loop sounds too bright in your configuration try removing this
capacitor.
Tube-Town GmbH - www.tube-town.net
Seite 7