Tube-Line BALE BOSS II, Руководство оператора

Страница: 6 / 71

Bale Processor Boss II -
Section 1 - Introduction 1-1
Section 1 - Introduction
Bale Sizes
Your BOSS TWO SQUARE BALE PROCESSOR is designed to load and shred all types of forage in
large square bales up to 2800 pounds (1270 kg). Maximum length of bales is 102” (274cm) or 8 ½’
and the width of bales may vary from 24” (61cm) to 58” (147cm).
Uses
1.
Laying windrows in open fields. Drive forward slowly while feeding out bales.
2. Filling feed bunks – fence line, circular, etc.
3. Spreading forage for livestock bedding.
4. Spreading mulch over perennial plants such as strawberries and mushrooms.
5. Retractable knife section for commodity chopping.
General Information
The purpose of this manual is to assist you in safely assembling, mounting, operating and maintaining
your Boss II. Read this manual carefully to obtain valuable information and instructions that will help
you achieve safe and dependable service. The illustrations and data used in this manual were current
at the time of printing, but due to possible engineering and/or production changes, this product
may vary slightly in detail. Tube·Line reserves the right to redesign and/or change components as
necessary without notification.
Throughout this manual, references may be made to :
Serial Number Location
Always refer to the model and serial number when ordering parts or requesting information from your
dealer. The serial number plate is located on left front of the tongue of your Tubeline Boss II machine.
See image at lower right of page.
Power Unit The engine-driven machine to which this product must be attached, ie;
loader tractor, skidsteer, telehandler, etc.
Right, Left, Front, Rear
Directions which are determined in relation to the operator of the
equipment when seated in the normal operating position.
IMPORTANT Precautions that must be followed to prevent damage to equipment.
NOTICE Precautions that must be followed to prevent substandard performance.
Purchaser ___________________________
Date of Purchase ______________________
Serial Number ______________________