6
“FOOTSWITCH” connection
The "FOOTSWITCH" jack is for connecting the 2-gang footswitch. With it you can switch the two
channels and switch off the reverb.
Folding system
A folding unit is integrated into the rear wall of the "blue note", which makes it possible to tilt
the amp to approx. 45° for direct sound reinforcement. For this purpose, only 2 wing screws are
loosely turned (these are located at the back left and right in the upper, inner area of the
housing). Then the lower rear wall is folded out and the two wing screws are retightened (not
too tightly). Now the amplifier can be placed at an angle.
When folding back the folding unit, make sure that it is firmly seated against the stop.
Tip: in the case of a loosely screwed folding unit, press the lower rear wall inwards with your left
hand and firmly tighten the left wing screw with your right hand. The other way round on the
right.
Note:
If the amplifier is prone to background noise (resonance humming) at certain tones, it is likely that the folding device
is the cause of the evil if it is not firmly fixed when folded in.
Technical Data
-
Output power:
approx. 30 Watt at 8 Ohm
-
Tube assembly:
4 x ECC83S JJ
2 X6V6GC JJ
-
Power consumption:
max. 80 Watt
-
Dimensions:
COMBO:
approx. 30 x 52 x 49 DxWxH (cm incl. cover and handle)
TOP:
approx. 28 x 52 x 20 DxWxH (cm incl. cover and handle)
-
Weight:
COMBO: approx. 12 Kg TOP:
approx. 5,7 kg
-
Loudspeakers:
Standard: JENSEN P12/100BB
