CHORD MODE
The chord memory mode allows you to memorize a chord consisting of up to six notes and transpose it
with the keyboard.
In the Juno-6 and 60 traditional chord mode works like this:
1. Play a chord.
2. Press the Hold button
3. Press Key Transpose
4. Freely transpose your held chord across the keyboard.
The Juno-66 offers a version of this as follows:
STANDARD CHORD MODE
1. Play a chord
2. While holding the chord press the Hold button
3. Press Key Transpose (long press so it is blinking)
4. Stop plaing the chord
5. Press Key Transpose (short press so the light goes out)
PUT THE JUNO INTO CHORD MODE
1. Make sure the Arpeggiator is OFF
2. Select Chord Mode (Down) with the MODE selector switch of the Arpeggiator controls.
3. Play your chord across the keyboard.
NOTE
You can switch in and out of Chord mode for playing both regularly as well as using the chords by simply
switching this lever to bring you in and out of chord mode.
You can even use the arpeggiator and arpeggiate the chord (so fun!)
11
