Tubble Kilo-w+s, Инструкция по эксплуатации

Страница: 6 / 46

In time, the filter will start depositing dust, please remove it regularly.
You can do so by wiping the filter with a dry cloth, a dust remover
brush or by shaking it gently. Please do not use the vacuum cleaner
and do not attempt to wash the filter.
You may consider exposing the filter to sunlight, this has a disinfectant
effect.
If the lamp symbol keeps flashing in red, that means you should
replace the filter. Please follow the indications. The filter should be
replaced at least once a year or sooner if the device signals it.
The device works optimally only with the specially designed, high
performance Tubble®filters. You can order them on www.tubble.com.
Notice:
5. Functioning instructions
When connecting the device to the power socket, the buzzer will ring for 1
second. The device enters the pre-processing mode (the light ring will
change in blue, cyan, green, yellow, red, purple, and after 30 seconds of
pre-processing, the color corresponding to the current air quality will be
displayed.)
Power Button
Touch the power button to turn on the device, the buzzer will ring for
one time, and the 'High mode' of the wind speed indicator will light on.
Touch the power button again, the buzzer will ring for one time and
the device as well as all the lights, will turn off.
Wind Speed Button
In case the device is functioning, press the wind speed button, the
buzzer will ring for one time and the wind speed will cycle between
Sleep-High-Auto. The corresponding light indicator will be white.
When turn to Sleep, the device will run at low wind speed; when turn
to High, the device will run at high wind speed. When turn to Auto, the
wind speed will adjust automatically to the air quality.
6