TTW Group mi-witness hd, Руководство пользователя

Страница: 11 / 40

Mi-Witness HD installation (2/4)
Designed by TTW Group 11
□ STEP 1
Insert Micro SD into the main
body. You must ensure to insert
the correct way round.
Slide the mount onto the main
body after checking the recording
direction of front camera.
Slide the External GPS cradle onto
the mount.
Clean the glass, before placing the
sticky pad, with an alcohol wipe.
□ STEP 2 □ STEP 3 □ STEP 4
□ STEP 5
Remove the double-sided tape
from the sticky pad.
Attach the camera firmly by
pressing to the glass.
Connect the rear camera, External
GPS and power cable to the main
camera. The power cable must be
connected last.
Check if WIFI and STATE LED
are on after connecting power
cable. If STATE LED blinks this is
normal and GPS LED is on after the
receipt of GPS signal.
□ STEP 6 □ STEP 7 □ STEP 8
▶ The GPS Status LED will be constantly ON when it receives GPS signal. If GPS doesn’t receive signal, LED will blink. GPS will acquire a better
signal with a clear view of the sky.

Mi-Witness HD front camera installation
Please note