Making a call
To switch the phone on, press and hold the On/Off/End Call button until you hear
a chime. The phone is now ready for use. Each mobile phone can call any of the
five other phones. Each phone is colour coded. To call a phone, simply press the
required coloured key. The phone will ring and the LED will flash. When the call is
accepted, the red LED will light to show that you are connected. To end a call at
any time, press the button again, or press the end call button briefly.
If the call is not accepted, it will disconnect automatically after 15 seconds.
Message Recording & Playback
The mobile phones can also record and play back up to ten seconds of audio. To
record a message, press and hold the record button whilst speaking into the
microphone. Simply press the play button to play back the recorded message.
Each subsequent recording will record over the previous message.
Power Saving
To preserve the battery the phone will disconnect a call automatically 10 minutes
after the last button press.
Mini-Mobile Phones Status LED
The status LED provides you with a clear indication of the mobile phone battery
status:
n
Constant Green (when docked) – battery is charged and the phone is ready
for use.
n
Flashing green - phone is ready for use.
n
Flashing red - battery is nearly depleted. Plug the phone into the docking
station to recharge.
n
Constant Red (when docked) – the phone is charging.
mini mobile Guide - eng_Layout 1 04/07/2013 10:17 Page 6